Surftest Extreme SV-3000CNC H [мм] X=200mm; Z2=500mm; Y-axis & α | MITUTOYO
Описание
These is a fully CNC surface roughness measuring instrument with powerful software FORMTRACEPAK.The Surftest Extreme SV-3000CNC offers you the following benefits:It is perfectly made for increased throughput of multiple profile and workpiece measurement tasks.Each axis has a drive speed of up to 200 mm/s.You can take continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit.Within the measuring range of the styli software FORMTRACEPAK supports contour calculation features.3D topography measurement as option available.Inclined plane measurement is possible through 2-axis simultaneous control in the X and Y directions.The detector unit incorporates an anti-collision safety device, causing it to automatically stop if its main body collides with a workpiece or jig.All models equipped with Y-axis.Z-axis tracking measurement for models without α-axis.Характеристики
- Base material
- Гранит
- Dimensions (WxDxH)
- 1 000 x 895 x 715 мм
- Drive speed
- 200 мм/с (макс. CNC)0-60 мм/с (джойстик)
- Inclining range
- от -45° (ПРЧС) до +10° (ПЧС)
- Measuring speed
- 0,02 - 2 мм/с
- Optional accessories
- Другие дополнительные и стандартные принадлежности перечислены далее в различных разделах принадлежностей и щупов.
- Profiles
- Первичный профиль (P), профиль шероховатости (R), волнистость (W), MOTIF (R, W) и другие
- Range
- 800 µm; 80 µm; 8 µm (up to 2.4 мм with an optional stylus)
- Resolution
- 0,05 мкм
- Scale
- Линейный датчик отражающего типа
- Software
- FORMTRACEPAKAllows control of all axis, motor-driven Y-axis table and optional rotary table for efficient automated measurement.Surface roughness analysis and contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required.
- Traverse
- X = 200 mmY = 200 mm
- Traverse straightness
- 0,5 мкм / 220 мм
- Y-axis table unit
- Установлен
- Стандарт
- EN ISO, VDA, JIS, ANSI и пользовательские настройки
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;
С этим товаром покупают
Не нашли что искали?
Ничего страшного! Специально для вас поставим любой необходимый вам инструмент в любом объеме по гарантированно низкой цене!