Formtracer Extreme SV-C4500CNC S [inch] X=200mm; Z2=300mm; Y-axis & α | MITUTOYO
Описание
High accurate fully CNC surface and contour measuring instrument.The Formtracer Extreme SV-C4500CNC offers you the following benefits:Powerful as two separate, fully CNC instruments.Measurement of long distances in Z2-axis for models without α- axis.Each axis has a drive speed up to 200 mm/s.Dual stylus system for upward and downward contour measurement at doubled sided contours.It´s variable contour measuring force is controlled by software FORMTRACEPAK.The contour drive unit is equipped with an arc encoder detector giving excellent accuracy and resolution in Z1-axis.Perfectly made for increased throughput of multiple profile and workpiece measurement tasks.The detector unit incorporates an anti-collision safety device, causing it to stop automatically if its main body collides with a workpiece or jig.Характеристики
- Accuracy
- Привод для измерения контураX= (0,8 +4L/200) мкм[ L длина измерения (мм)]Z1= (0,8 + |2H|/100) мкм[ H высота измерения от горизонтального положения (мм)]Модель без α-осиZ2= (1,5 + 10H/1000) мкм
- Drive speed
- С ЧПУ макс. 200 мм/с С джойстиком 0-50 мм/с
- Inclining range
- -45° (ПрЧС) до +10° (ПЧС)
- Measuring force
- 0,75 мН
- Measuring range
- Z2= [S] 300 mm / [H] 500 mm mm
- Measuring speed
- 0,02 - 2 мм/с
- Software
- FORMTRACEPAKAllows control of all axis, motor-driven Y-axis table and rotary table for efficient automated measurement.Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard.An inspection certificate can be created by setting the print format as required.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;
С этим товаром покупают
Не нашли что искали?
Ничего страшного! Специально для вас поставим любой необходимый вам инструмент в любом объеме по гарантированно низкой цене!